Like Butter CNC Routing Like Butter CNC Routing Like Butter CNC Routing

CNC Routing

$0.00
We offer a professional CNC routing service in a range of materials for other designers, makers, manufacturers and domestic clients.

Materials include plywood, solid timber, acrylic, engineering plastics, aluminium and many more.

Many smaller jobs fall under our minimum setup and programming fee of $150 inc GST.

QUOTE REQUEST FORM

Typical machine setup: 2440x1220mm with vacuum hold down bed.
Maximum machine travel: 2751x1590x90mm (XYZ)
Fixed 3-Jaw lathe chuck with 65mm through-hole.
Fixture plate 500x250mm with M8 threaded holes at 50mm centres.

Preferred file formats:
- Fusion 360 models and profile cutting.
- Rhino 5 for models and profile cutting.
- .DXF and .DWG for profile cutting.
- .STEP for models.
- .AI for profile cutting, please ensure geometry is a single outline vector.

If providing nested sheets, please supply them within a single file. Separate layers for each machine operation type is preferred but not essential.

We can draw up and program files as per your specifications, a dimensioned sketch is often enough for simple jobs.

Tooling guide:

- For most panel work in 9-30mm stock we use a 9.5mm diameter compression cutter with 11mm part spacing and 3mm margin.
- The smallest cutter that can through-cut 18mm stock is 4mm diameter.
- Most Opendesk products are cut with an 8mm dia compression cutter. 12-24mm thick stock.
- 6mm stock we commonly use 4-6mm diameter cutters.
- Max stock thickness for engraving ~80mm.
- Max stock thickness for through cutting 50-60mm.
- Aluminium 1-12mm we commonly use a 6.35mm dia cutter.
- Acrylic 3-12mm we use a 4.76mm dia cutter.

CNC Routing

We offer a professional CNC routing service in a range of materials for other designers, makers, manufacturers and domestic clients.

Materials include plywood, solid timber, acrylic, engineering plastics, aluminium and many more.

Many smaller jobs fall under our minimum setup and programming fee of $150 inc GST.

QUOTE REQUEST FORM

Typical machine setup: 2440x1220mm with vacuum hold down bed.
Maximum machine travel: 2751x1590x90mm (XYZ)
Fixed 3-Jaw lathe chuck with 65mm through-hole.
Fixture plate 500x250mm with M8 threaded holes at 50mm centres.

Preferred file formats:
- Fusion 360 models and profile cutting.
- Rhino 5 for models and profile cutting.
- .DXF and .DWG for profile cutting.
- .STEP for models.
- .AI for profile cutting, please ensure geometry is a single outline vector.

If providing nested sheets, please supply them within a single file. Separate layers for each machine operation type is preferred but not essential.

We can draw up and program files as per your specifications, a dimensioned sketch is often enough for simple jobs.

Tooling guide:

- For most panel work in 9-30mm stock we use a 9.5mm diameter compression cutter with 11mm part spacing and 3mm margin.
- The smallest cutter that can through-cut 18mm stock is 4mm diameter.
- Most Opendesk products are cut with an 8mm dia compression cutter. 12-24mm thick stock.
- 6mm stock we commonly use 4-6mm diameter cutters.
- Max stock thickness for engraving ~80mm.
- Max stock thickness for through cutting 50-60mm.
- Aluminium 1-12mm we commonly use a 6.35mm dia cutter.
- Acrylic 3-12mm we use a 4.76mm dia cutter.
Yum
Like Butter CNC Routing Like Butter CNC Routing Like Butter CNC Routing